D P L
Dpw-8-63 \ dpw-10-40 electromagnetic pressure distribution directional valve
Main technical parameters
1) Working pressure: 2.5~6.3MPa
2) Nominal diameter: 8mm, 10mm, 15mm, 20mm, 25mm
3) Connection mode:
Standard pipe joint connection (G) or plate connection (B).
DPF connection mode: board connection
4) Working medium: engine oil, and the internal leakage amount is 10 ml/min.
5) Rated voltage: DC24C, 48V, 110V, 220V, and AC220V.
6) Working mode: instantaneous power supply, long power supply or manual operation.
7) Medium temperature: 0~60℃.
8) Power consumption of electromagnet: 25~35W.
● adopts a fully sealed junction box, and the joint surface of the electromagnet and the outside world is sealed with special sealant, which improves the insulation performance and protection level of electrical appliances.
● valve core is horizontal, low driving power, many levels of DC working voltage available.
● valve core does not need to add pressure-free oil discharge pipe, the oil directly into the oil collection tank.
● has ball mechanical self-holding mechanism, can adjust the spring compression to change the self-holding force.
The ● stroke switch action is reliable, with large contact capacity.
The structure form of ● electromagnet is wet, the shell doubles as a magnetic guide and has a good protective structure, the moving core connection rod exit end cover, can be manually switched
