D P L
WP-D-8/16-33-HH temperature patrol detector
Goods Number; 1245434
model;WP-D
Processing customization; is
Measurement accuracy; 0.25
Structural type; instrument
display mode;LED
Overall dimensions; 160 * 80 (mm)
Opening size; 152 * 76 (mm)
Main technical parameters
incoming signal
Measurement channel 1~8,1~16,1~32 circuit survey
Analog quantity thermocouple: standard thermocouple- -B, S, K, E, J, T, WRe3~25, etc
Resistance: standard thermal power resistance- -Pt100, Cu50, remote transmission pressure resistance: 30~350 Ω, etc
Current: 0~10mA, 4~20mA, etc. (input impedance: 250 Ω)
Voltage: 0~5V, 1~5V, mV, etc. (input impedance: 250 KΩ)
output signal
Analog output DC 4~20mA (load resistance 500 Ω) DC 0~10mA (load resistance 750 Ω)
DC 1~5V (load resistance 250 KΩ) DC 0~5V (load resistance 250K Ω)
Switch output relay control output-ON / OFF (with return)
Contact capacity: AC220V / 3A; DC 24V / 5A (resistance load)
CR control output-SCR (over zero trigger pulse) output; AC400V/0.5A
Solid-state relay output-SSR (solid-state relay control signal) output; DC 5V~24V / 30mA
Communication Outputs the standard serial communication interface
Communication mode: RS-232C, RS-485
Baud rate of 300bps~9600bps (free set)
Feed the output of DC 24V, with a load of 30mA
characteristic
Measurement accuracy number: ± 0.5%FS ± 1-word light column: ± 1%FS
Resolution digital display: ± 1-word light column display: ± 1 line
Display range number: -1999~9999 Light column: 0~100%
Display mode four high brightness LED digital display 101 line high resolution light column display
Operating status display single screen digital display / dual screen digital display
Single screen digital + single light column display dual screen digital + double light column display
Control mode can choose upper, upper, upper and lower control
Control set value control set value and return difference value in the full range of free setting
Temperature compensation 0~50℃ temperature compensation
Parameter setting panel Touch button digital setting parameter setting value is permanently saved after power failure
Parameter Setpoint password lock
Protection mode Thermocouple / thermal resistance input disconnection alarm relay output state LED indication
Input over / underrange alarm input over range flashing alarm
Work abnormal automatically reset
service environment
Ambient temperature-30~70℃
Relative humidity of 85% no condensation to avoid use in corrosive and flammable and explosive gases
Power supply voltage linear power supply AC190V~240V
Switch power supply AC / DC 90V~265V AC / DC 22V~26V
Power consumption: 5W (AC 190V~240V linear power supply)
4W (AC / DC85V~265V switch power supply)
6W (AC / DC 22V~26V switch power supply)
