D P L
TURCK FCT
1、 Overview
FCT / FCS this type of flow switch integrates sensor and signal processor. It is an ideal element to detect the flow rate of water medium and oil medium
2、 Characteristics
■ integrated sensor and signal processor
■ withstand voltage grade: 10MPa
■ protection grade IP67
■ simple potentiometer adjustment
■ led flow status indication
■ transistor output with short circuit protection function
■ conprox fast cable connector
■ switching point accuracy does not change with fluid temperature
3、 Technical parameters of Turck flow switch, fct-g1 / 2a4p-vrx / 24VDC flow switch instrument
■ working voltage: 19.2 ~ 288 VDC or AC220V
■ working current: ≤ 65 Ma
■ output part: transistor output or relay output, with short-circuit protection and reverse polarity protection
■ switching current: ≤ 400mA
■ temperature range: - 25 ℃ ~ + 80 ℃ (continuous)
■ (fluid) up to + 100 ℃
■ working range: water 1 ~ 150 cm / S
■ (flow rate) oil 3 ~ 300 cm / S
■ switching characteristics: typical value 8s (2 ~ 15s)
■ closing time: typical value 2S (1 ~ 13s)
■ on time: typical value: 2S (1 ~ 13s)
■ temperature response time: ≤ 12s
■ withstand voltage level: 10MPa
■ LED displays 6 groups of highlighted LEDs
■ lower than the set value, the red light is on
■ equal to the set value, the yellow light is on
■ higher than the set value 4 × Green light is on (yellow light is also on)
■ probe shell material: A4 stainless steel (no.1.4571)
■ cable connection mode: conprox fast cable connector
BN = Brown, bu = blue, BK = black
■ other shell materials: PBT or stainless steel
■ ambient temperature: - 25 ℃ ~ + 80 ℃
■ connection mode: threaded connection G1 / 2
■ degree of protection: IP 67
■ torque: 100nm
