D P L
Bearing oil level zwx-150 oil level gauge
Bearing oil level gauge ZWX-150 bearing oil level signal drawing ZWX type bearing oil level signal is used to measure the position of the thrust bearing in the guide bearing oil tank, and can realize the alarm signal when the oil surface rises or drops to the limit position.The signal device consists of junction box, magnetic control switch and magnetic float.The float rises or falls with the change of the oil surface. The float has a permanent magnetic ring. The magnetic force of the magnetic ring will connect the wet spring relay contact in the glass pipe, causing the high or low oil level signal relay of the power station to give an alarm
[technical parameter]
1) The bottom surface of the oil level signal to the low oil level height is at least 100mm, and the low oil level signal is determined when leaving the factory;
2) Allowable through AC voltage of 220V, current of 1A;
3) The product is vertical installation, and the ambient temperature is less than 55℃;
4) The breathing hole should not be blocked to ensure the internal and external ventilation of the signal device, so that the internal and external pressure is the same;
5) The magnet switch of this product is normally open, and the number and measurement range of switches can be customized according to customer requirements
